Free Download Engineering | Science | Technology Books

File : pdf, 638 KB, 259 pages

TOC

CHAPTER 1. GENERAL
1. PURPOSE AND SCOPE
2. APPLICABILITY
3. REFERENCES
2. BIBLIOGRAPHY

CHAPTER 2. APPLICABLE DESIGN SPECIFICATIONS
1. GENERAL
2. USACE AND OTHER MILITARY DOCUMENTS
3. AISC SPECIFICATIONS AND STANDARDS
4. AWS SPECIFICATIONS AND STANDARDS
5. FEDERAL EMERGENCY MANAGEMENT AGENCY

CHAPTER 3. WELDING PROCESSES AND MATERIALS
1. WELDING AND RELATED PROCESSES
- General – Welding
- General – Heating and Thermal Cutting
- General – Weld Heat-Affected Zone
- Project Specifications
2. APPLICATION OF HEAT FOR WELDING
- Cooling Rate Control
- Preheat for Prequalified Applications
- Preheat for Non-prequalified Applications
- Preheat for Sheet Steel to Structural Steel
- Interpass Temperature
- Postheat (PWHT)
3. APPLICATION OF HEAT FOR STRAIGHTENING AND CAMBERING
4. THERMAL CUTTING
- Oxyfuel Cutting
- Plasma Arc Cutting
- Edge Quality
5. AIR CARBON ARC GOUGING

CHAPTER 4. STRUCTURAL STEELS
1. AISC AND AWS LISTED STRUCTURAL STEELS
- AISC Approved Steels
- AWS Prequalified Steels
- AWS Approved Steels
- Matching Filler Metals for Prequalified Steels
- Matching Filler Metals for Non-qualified Steels
- Unlisted Steels
2. WELDABILITY OF STRUCTURAL STEELS
3. PROPERTY ENHANCEMENTS FOR STRUCTURAL STEELS
4. SELECTION OF STRUCTURAL STEELS FOR ENVIRONMENTAL EXPOSURE AND SERVICE APPLICATIONS
- High-seismic Applications
- Fatigue Applications
- Cold Weather Applications
- High Stress / Strain / Restraint Applications
5. AVAILABILITY OF STRUCTURAL STEELS

CHAPTER 5. DESIGN FOR WELDING
1. GENERAL
2. GOOD DESIGN PRACTICE
3. DESIGN AND FABRICATION OF WELDED JOINTS
- Effective Weld Size/Throat
- Allowable Stresses/Design Strengths
- Minimum/Maximum Weld Sizes
- Maximum Fillet Weld Size
- Available Design Aids
- Weld Access Holes
- Reentrant Corners
- Heavy Section Joint Provisions
4. DESIGN FOR CYCLICALLY LOADED STRUCTURES (FATIGUE)
- General
- Fatigue Design Details
- Allowable Stress Ranges
- Fatigue Life Enhancement
5. HIGH SEISMIC APPLICATIONS
- Latest Guidance
- Applicability
- Materials Concerns and Specifications
- Joint Selection

CHAPTER 6. STUD WELDING
1. GENERAL
2. STUD WELDING PROCESS
3. STUD BASE QUALIFICATION
4. WELDING PERSONNEL QUALIFICATION
5. PRE-PRODUCTION TESTING
6. INSPECTION

CHAPTER 7. WELDING TO EXISTING STRUCTURES
1. GENERAL
2. DETERMINING WELDABILITY OF EXISTING STRUCTURAL STEELS
- Investigation
- Carbon Equivalency
3. WELDING TO OLDER STRUCTURAL STEELS
4. INTERMIXING WELD PROCESSES AND FILLER METALS
- FCAW-S Deposits
- Investigation
- Other Processes
5. STRENGTH REDUCTION EFFECTS AND OTHER CONCERNS WHEN WELDING UNDER LOAD
- Elevated Temperature Effects
- Welding Direction and Sequence
6. HAZARDOUS MATERIALS

CHAPTER 8. QUALITY ASSURANCE AND INSPECTION
1. GENERAL
2. REVIEWING AND APPROVING WELDING PROCEDURES
3. WELDING PERSONNEL QUALIFICATION

Download      :       pdf1