Free Download Engineering | Science | Technology Books

File : pdf, 226 KB, 67 pages

TOC

CHAPT 1 INTRODUCTION

CHAPT 2 INSPECTOR QUALIFICATIONS, CERTIFICATIONS AND LICENSES

CHAPT 3 INSPECTION AND TEST FREQUENCIES

3-1 BOILERS

3-2 UNFIRED PRESSURE VESSELS

CHAPT 4 BOILER INSPECTIONS
4-1 GUIDANCE
4-2 EXTERNAL INSPECTION OF BOILERS
4-3 INTERNAL INSPECTION OF BOILERS
4-4 BOILERS IN WET OR DRY LAY-UP

CHAPT 5 UNFIRED PRESSURE VESSEL INSPECTIONS
5-1 GUIDANCE
5-2 EXTERNAL INSPECTIONS OF UNFIRED PRESSURE VESSELS
5-3 INTERNAL INSPECTIONS OF UNFIRED PRESSURE VESSELS
5-4 MILITARY SPECIFICATION (MILSPEC) PRESSURE VESSELS
5-4.1 Internal and External Inspections
5-4.2 Ultrasonic Examination
5-4.3 Variations
5-5 DEAERATORS
5-6 LIQUIFIED PETROLEUM GAS (LPG) TANKS
5-6.1 External Inspection
5-6.2 Internal Inspection
5-6.3 Hydrostatic Test
5-6.4 Safety Relief Valves

CHAPT 6 PRESSURE TESTS
6-1 HYDROSTATIC TESTS
6-1.1 Strength Test Pressure
6-1.2 Tightness Test Pressure
6-1.3 Precautions
6-1.4 Possible Deformation
6-1.5 Hold Pressure
6-1.6 Inspection Under Pressure
6-1.7 Permanent Deformation
6-1.8 Gaskets
6-2 PNEUMATIC TESTS
6-3 PRESSURE TEST RESULTS
6-3.1 Yielding During Test
6-3.2 No Yielding During Test
6-3.3 Inspection Under Pressure

CHAPT 7 OPERATIONAL TESTS
7-1 GUIDANCE
7-1.1 Purpose
7-1.2 Conditions to be Reported
7-2 FIRING EQUIPMENT
7-3 CONTROLS
7-4 PIPING AND PIPING CONNECTIONS
7-5 DEVICES
7-5.1 Temperature Indicating Devices
7-5.2 Metering and Recording Devices
7-6 VALVES
7-6.1 Blow-Down Valves
7-6.2 Stop and Check Valves
7-6.3 Pressure Reducing Valves
7-6.4 Safety and Safety Relief Valves
7-7 BOILER AUXILIARIES
7-8 BOILER AND FEEDWATER TREATMENT
7-9 FUEL HANDLING PRACTICES

CHPAT 8 REPAIRS AND ALTERATIONS
8-1 GUIDANCE
8-2 CONTRACTOR REPAIRS
8-2.1 NAVY Welder Qualifications
8-2.2 Repairs by a Navy Welder
8-3 SETTING SAFETY AND RELIEF VALVES
8-4 RECORDS

CHAPT 9 INSPECTION CERTIFICATES AND REPORTS
9-1 PROCEDURES FOR SUBMITTING REPORTS AND FORMS
9-1.1 Inspection Reports – Boilers and Unfired Pressure Vessels
9-1.2 Inspection Certificate for Boilers – Unfired Pressure Vessels

CHAPT 10 MAXIMUM ALLOWABLE WORKING PRESSURE
10-1 GUIDANCE
10-2 STANDARD BOILERS
10-2.1 Standard Watertube Boilers
10-2.2 Standard Cast-Iron Steam Boilers
10-3 NONSTANDARD BOILERS
10-3.1 Nonstandard Riveted Boilers
10-3.2 Nonstandard Welded Boilers
10-3.3 Nonstandard Cast-Iron Boilers
10-4 CALCULATIONS OF MAXIMUM ALLOWABLE WORKING PRESSURE
10-5 FACTOR OF SAFETY

CHAPT 11 MISHAP OR PROPERTY DAMAGE REPORTING
11-1 REPORTING REQUIREMENTS
11-2 INFORMATION COPIES

Download : pdf1